QuickChange Penta spigots
Universal quick changeover system with the highest clamping force!
This clamping module has a holding force of no less than >35,000N, while the module’s installation dimension is only ø47.5x31mm.
QPD clamping spigots
These spigots are suitable for mounting either from the top (model QPD_T) or from the bottom (model QPD_B). The preferred way is from the top. If a system can no longer be opened, the mounting aids are accessible and the clamping spigot can therefore be removed.
The models
QPD-F with clamping function:
These clamping spigots only have a clamping function and can compensate in the XY direction up to 0.1mm.
QPD-Z with zero point function:
These clamping spigots have a zero point function enabling a repeat accuracy of 0.005mm to be created. The clamping spigots have an alignment edge for precise positioning.
QPD-A with alignment function:
These clamping spigots have an alignment function with which, along with a centring clamping spigot, a repeat accuracy of 0.005mm can be created. The clamping spigots have an alignment edge for precise positioning.
Dimensions
Specifications
| Article No. | Model | D1 (mm) | M1 | X (mm) | SW | Pack. |
|---|---|---|---|---|---|---|
| clamping function: | ||||||
| 1005.0206 | QPD-FT-M6 | 10 | M6 | 3 | 20 | 1 |
| 1005.0206 | QPD-FT-M8 | 12 | M8 | 3 | 20 | 1 |
| 1005.0210 | QPD-FT-M10 | 14 | M10 | 20 | 1 | |
| 1005.0305 | QPD-FB-M6 | 10 | M6 | 3 | 20 | 1 |
| 1005.0308 | QPD-FB-M8 | 12 | M8 | 3 | 20 | 1 |
| Zero-point function: | Internal: | |||||
| 1005.1206 | QPD-ZT-M6 | 10 | M6 | 5 | 16.5 | 1 |
| 1005.1208 | QPD-FT-M8 | 12 | M8 | 5 | 16.5 | 1 |
| 1005.1210 | QPD-ZT-M10 | 14 | M10 | 6 | 1 | |
| 1005.1306 | QPD-ZB-M6 | 10 | M6 | 5 | 1 | |
| 1005.1308 | QPD-ZB-M8 | 12 | M8 | 5 | 1 | |
| alignment function: | ||||||
| 1005.2206 | QPD-AT-M6 | 10 | M6 | 5 | 1 | |
| 1005.2208 | QPD-AT-M8 | 12 | M8 | 5 | 1 | |
| 1005.2210 | QPD-AT-M10 | 14 | M10 | 6 | 1 | |
| 1005.2306 | QPD-AB-M6 | 10 | M6 | 5 | 1 | |
| 1005.2308 | QPD-AB-M8 | 12 | M8 | 5 | 1 |