PerfoPlate vacuum adapter plates with micro holes
The flexible vacuum adapter plate with high clamping force!
For rectangular and simple and complex shaped workpieces. For flexible clamping with average clamping force.
Field of application
TBC/TPP
Surface machining
TBC/TPP + TPM
Simple outside contour
TBC/TPP + TPM
Complex outside contour
TBC/TPP + TPM
Cutting through operations
TBC/TPP + TAM
Film machining without mat
TBC/TPP + TAM
Film machining with mat
How it works
These vacuum chucks can only be used with the Tepas VacuMat or PerfoMat mats. Micro holes have been made in the clamping surface of these vacuum chucks. The very small micro holes limit the leakage of the vacuum with smaller workpieces or when workpieces are cut through. The Tepas PerfoMat mats have larger holes that enlarge the vacuum sealed zone.
Machining with emulsion
If the workpieces are machined with emulsion, the vacuum pump must have a fluid separator or a liquid ring pump will have to be selected.
The benefits
- Limited vacuum leakage meaning a high clamping force can be achieved.
- Suitable for both light and heavy machining.
- Cutting through is possible without the vacuum chuck being damaged, when VacuMat or PerfoMat are used.
Clamping and positioning
This adapter plate can be used with the BaseChuck modular vacuum chuck
Dimensions
Specifications
| Article no. | Model | L (mm) | B (mm) | H (mm) | Pack. |
|---|---|---|---|---|---|
| 6222.0200 | TPP-200 | 300 | 200 | 8 | 1 |
| 6222.0300 | TPP-300 | 400 | 300 | 8 | 1 |
| 6222.0400 | TPP-400 | 600 | 400 | 8 | 1 |
| 6222.0500 | TPP-500 | 500 | 500 | 8 | 1 |