PerfoMat+ vacuum mats for Perfo+
Vacuum clamping without sealing!
The Tepas PerfoMat+ vacuum mats are used on the Perfo+ adapter plates for large (portal) milling machines. With the Tepas Perfo+ system, very small workpieces from approx. 5 x 5 cm can be successfully held and even cut through. Tepas Perfo+ adapter plates are placed on existing vacuum chucks and work with the vacuum pump(s) that is/are already present, therefore the perfect solution is achieved with minimum investment.
Field of application
TP+
Surface machining
TP+ with TPMS+
Simple outside contour
TP+ with TPMS+
Complex outside contours
TP+ with TPMS+
Cutting through operations
- TP+: Tepas Perfo+ adapter plate
- TPMS+: Tepas perfoMat+ vacuum mat with adhesive layer
How it works
The vacuum leakage is reduced significantly by the micro holes of the Perfo+ adapter plate. Because of its larger holes, the PerfoMat+ enlarges the vacuum clamping surface and significantly increases the slip resistance of the workpiece. Using tools, workpieces can be fully cut through. Using, for example, a cutter, the mat beneath the workpiece is milled into. In combination with a vacuum pump with overflow-function, this version is suitable for applications with coolant emulsion (wet) or with micro lubrication.
The model
Perfomat+ S
Vacuum mat with adhesive layer.
Dimensions
Specifications
| Article no. PerfoMat+ S | Model PerfoMat+ S | L (mm) | B (mm) | H (mm) | W (mm) | D (mm) | Pack. |
|---|---|---|---|---|---|---|---|
| Fine: | |||||||
| 6420.0500 | TPMS+ F 500-500 | 500 | 500 | 1 | 10 | 3 | 1 |
| 6420.0610 | TPMS+ F 610-610 | 610 | 610 | 1 | 10 | 3 | 1 |
| Medium: | |||||||
| 6410.2400 | TPMS+ M 500-500 | 500 | 500 | 1 | 10 | 5 | 1 |
| 6422.0610 | TPMS+ M 610-610 | 610 | 610 | 1 | 10 | 5 | 1 |
