PerfoChuck vacuum clamping chucks with micro holes
The flexible vacuum chuck with high clamping force!
For rectangular and simple and complex shaped workpieces. For flexible clamping with average clamping force.
Field of application
TPC
Surface machining
TPC + TPM
Simple outside contour
TPC + TPM
Simple outside contour
TPC + TPM
Cutting through operations
TPC
Film machining without mat
TPC + TAM
Film machining with mat
How it works
These vacuum chucks can only be used with the Tepas VacuMat or PerfoMat mats. Micro holes have been made in the clamping surface of these vacuum chucks. The very small micro holes limit the leakage of the vacuum with smaller workpieces or when workpieces are cut through. The Tepas PerfoMat mats have larger holes that enlarge the vacuum sealed zone.
Machining with emulsion
If the workpieces are machined with emulsion, the vacuum pump must have a fluid separator or a liquid ring pump will have to be selected.
The benefits
- Limited vacuum leakage meaning a high clamping force can be achieved.
- Suitable for both light and heavy machining.
- Cutting through is possible without the vacuum chuck being damaged, when VacuMat or PerfoMat are used.
Clamping and positioning
Can be used with almost all zero point clamping systems. With sliding end stops for precise positioning of workpieces. With longitudinal slots for direct mounting on the machine table with clamps.
Features
Dimensions
Specifications
| Article no. | Model | L (mm) | B (mm) | H (mm) | Pack. |
|---|---|---|---|---|---|
| 6002.0300 | TPC-300 | 400 | 300 | 35 | 1 |
| 6002.0400 | TPC-400 | 600 | 400 | 35 | 1 |