µmChuck vacuum clamping chucks with microporous clamping surface
The problem-solving vacuum chuck!
If vacuum clamping with the GridChuck or PerfoChuck is not possible, this vacuum chuck with microporous clamping surface will often provide a solution.
Field of application
TUC + TPM
Surface machining
TUC + TPM
Simple outside contour
TUC + TPM
Simple outside contour
TUC + TPM
Cutting through operations
TUC
Film machining
TUC + TAM
Film machining with intermediate mat
How it works
The air-permeable clamping surface reduces high vacuum leakages, whereby the vacuum pump is able to create a vacuum.
The benefits
- Very high flatness of the clamping surface in µm range is possible.
- No deformation of the workpiece as there are no grooves or holes in the clamping surface.
- With the Tepas VacuMat and PerfoMat, a very wide range of applications is possible.
- Microporous clamping surfaces are water-resistant, however coolant can seal the surface meaning there is no longer a vacuum. Therefore, do not use a coolant emulsion but machine dry.
Clamping and positioning
Can be used with almost all zero point clamping systems. With sliding end stops for precise positioning of workpieces. With longitudinal slots for direct mounting on the machine table with clamps.
Features
Dimensions
Specifications
| Article no. | Model | L (mm) | B (mm) | H (mm) | Pack. |
|---|---|---|---|---|---|
| 6003.0300 | TUC-300 | 400 | 300 | 35 | 1 |
| 6003.0400 | TUC-400 | 600 | 400 | 35 | 1 |
